2,4-Dichlorophenol
| |||
| Names | |||
|---|---|---|---|
| Preferred IUPAC name
2,4-Dichlorophenol | |||
| Identifiers | |||
3D model (JSmol)
|
|||
| 742467 | |||
| ChEBI | |||
| ChEMBL | |||
| ChemSpider | |||
| ECHA InfoCard | 100.004.027 | ||
| EC Number |
| ||
| 261170 | |||
| KEGG | |||
PubChem CID
|
|||
| RTECS number |
| ||
| UNII | |||
| UN number | 2020 | ||
CompTox Dashboard (EPA)
|
|||
| |||
| |||
| Properties | |||
| C6H4Cl2O | |||
| Molar mass | 163.00 g·mol−1 | ||
| Appearance | White solid | ||
| Odor | Phenolic | ||
| Density | 1.38 g/cm3 | ||
| Melting point | 43.2 °C (109.8 °F; 316.3 K)[1] | ||
| Boiling point | 210 °C (410 °F; 483 K)[1] | ||
| 50 g/L | |||
| Thermochemistry[2] | |||
Std enthalpy of
formation (ΔfH⦵298) |
−226.4 kJ·mol−1 (s) −156.3 kJ·mol−1 (gas) | ||
| Hazards | |||
| GHS labelling: | |||
   
| |||
| Danger | |||
| H302, H311, H314, H411 | |||
| P260, P264, P270, P273, P280, P301+P312, P301+P330+P331, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P310, P312, P321, P322, P330, P361, P363, P391, P405, P501 | |||
| NFPA 704 (fire diamond) | |||
| Flash point | 114 °C (237 °F; 387 K)[3] | ||
| Lethal dose or concentration (LD, LC): | |||
LD50 (median dose)
|
47.0 mg/kg (oral in rats) 790.0 mg/kg (Dermal exposure in mammals) | ||
| Safety data sheet (SDS) | External MSDS | ||
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
| |||
2,4-Dichlorophenol (2,4-DCP) is a chlorinated derivative of phenol with the molecular formula Cl2C6H3OH. It is a white solid that is mildly acidic (pKa = 7.9). It is produced on a large scale as a precursor to the herbicide 2,4-dichlorophenoxyacetic acid (2,4-D).[4]
Production and use
[edit]2,4-DCP is produced by chlorination of phenol.[4]
Annual worldwide production is estimated at 88 million pounds.[5] It is also a photo-degradation product of the common antibacterial and antifungal agent triclosan along with the dioxin 2,8-dichlorodibenzo-p-dioxin.[6][7]
Safety
[edit]The LD50 is 580 mg/kg (rats, oral). Liquid (molten) 2,4-DCP is readily absorbed through the skin.[8] Solid 2,4-DCP does not readily absorb through skin and has a lower NFPA H=3 rating (versus H=4 for molten 2,4-DCP). This is primarily caused by instantaneous kidney failure, liver failure, and failure of various other organs.[dubious – discuss]
See also
[edit]References
[edit]- ^ a b Haynes, p. 3.166
- ^ Haynes, p. 5.12
- ^ Haynes, p. 16.20
- ^ a b François Muller, Liliane Caillard (2011). "Chlorophenols". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a07_001.pub2. ISBN 978-3527306732.
- ^ Desmurs J, Ratton S. Chlorophenols. In: Kirk-Othmer Encyclopedia of Chemical Technology, 4th Edition. Kroschwitz JI, Howe-Grant M, eds. New York: John Wiley and Sons, 1993;6:156–168
- ^ Singer H, Muller S, Tixier C, Pillonel L (2002). "Triclosan: occurrence and fate of a widely used biocide in the aquatic environment: field measurements in wastewater treatment plants, surface waters, and lake sediments". Environ Sci Technol. 36 (23): 4998–5004. Bibcode:2002EnST...36.4998S. doi:10.1021/es025750i. PMID 12523412.
- ^ Latch DE, Packer JL, Stender BL, VanOverbeke J, Arnold WA, McNeill K (2005). "Aqueous photochemistry of triclosan: formation of 2,4-dichlorophenol, 2,8-dichlorodibenzo-p-dioxin, and oligomerization products". Environ. Toxicol. Chem. 24 (3): 517–25. doi:10.1897/04-243R.1. PMID 15779749. S2CID 19322739.
- ^ Kintz P, Tracqui A, Mangin P (1992). "Accidental death caused by the absorption of 2,4-dichlorophenol through the skin". Arch. Toxicol. 66 (4): 298–9. doi:10.1007/BF02307178. PMID 1514931. S2CID 23764834.