Jump to content

EMD FP7

From Wikipedia, the free encyclopedia
EMD FP7
Western Pacific 805-A, an EMD FP7, pulls the California Zephyr in March 1970
Type and origin
Power typeDiesel-electric
BuilderGeneral Motors Electro-Motive Division (EMD)
General Motors Diesel (GMD, Canada)
ModelFP7
Build dateJune 1949 – December 1953
Total produced381
Specifications
Configuration:
 • AARB-B
 • UICBo'Bo'
Gauge4 ft 8+12 in (1,435 mm)
TrucksBlomberg B
Wheel diameter40 in (1,016 mm)
Minimum curve23° (251 ft or 76.5 m radius)
Wheelbase43 ft (13.11 m)
Length55 ft 2+14 in (16.82 m)
Width10 ft 8 in (3.25 m)
Height15 ft (4.57 m)
Loco weight260,000 lb (120,000 kg)
Fuel capacity1,200 US gal (4,500 L; 1,000 imp gal)
Prime moverEMD 16-567B
RPM range800
Engine typeTwo-stroke V16 diesel
AspirationRoots-type supercharger
GeneratorEMD D-12
Traction motors(4) EMD D-27-B
Cylinders16
Cylinder size8+12 in × 10 in (216 mm × 254 mm)
Performance figures
Maximum speed100–119 mph (161–192 km/h)
Power output1,500 horsepower (1,100 kW)
Career
LocaleNorth America, Saudi Arabia

The EMD FP7 is a 1,500 horsepower (1,100 kW), B-B dual-service passenger and freight-hauling diesel locomotive produced between June 1949 and December 1953 by General Motors' Electro-Motive Division and General Motors Diesel. Final assembly was at GM-EMD's La Grange, Illinois plant, excepting locomotives destined for Canada, in which case final assembly was at GMD's plant in London, Ontario. The FP7 was essentially EMD's F7A locomotive extended by four feet to give greater water capacity for the steam generator for heating passenger trains.

Design

[edit]

While EMD's E-units were successful passenger engines, their A1A-A1A wheel arrangement made them less useful in mountainous terrain.[citation needed] Several railroads had tried EMD's F3 in passenger service, but there was insufficient water capacity in an A-unit fitted with dynamic brakes. The Atchison, Topeka and Santa Fe Railway's solution was to replace the steam generators in A-units with a water tank, and so only fitted steam generators into the B-units. The Northern Pacific Railway's solution was to fit extra water tanks into the first baggage car, and to pipe the water to the engines. EMD's solution to the problem was to add the stretched FP7 to its catalog increasing the water storage capacity.

AMTK No. 113 leading two EMD SDP40Fs with the San Francisco Zephyr at Yuba Gap, 1975

A total of 378 cab-equipped lead A units were built; unlike the freight series, no cabless booster B units were sold. Regular F7B units were sometimes used with FP7 A units, since they, lacking cabs, had more room for water and steam generators. The FP7 and its successor, the FP9, were offshoots of GM-EMD's highly successful F-unit series of cab unit freight diesel locomotives.

F3s, F7s, and F9s equipped for passenger service are not FP-series locomotives, which, although similar in appearance, have distinctive differences. This includes, but not limited to, the greater body length. The extra 4 ft (1.2 m) of length was added behind the first body-side porthole, and can be recognised by the greater distance between that porthole and the first small carbody filter grille. The corresponding space beneath the body, behind the front truck, was also opened up; this either remained an empty space or was filled with a distinctive water tank shaped like a barrel mounted transversely.[1]

Over their production run, there were numerous detail changes including the style of side grills (notably on Canadian-built units), carbody louvres, and dynamic brake fan sizing (36 in [0.91 m] initially, 48 in [1.2 m] on later production units). Some railroads such as Southern Pacific and Canadian Pacific outfitted their units with rooftop-mounted icicle breakers for protecting dome car windows in mountain territory where icicles formed around the roofs of tunnels.

Original owners

[edit]

EMD built 378 FP7 locomotives. Major buyers included the Louisville and Nashville Railroad (45), Atlantic Coast Line Railroad (44), Pennsylvania Railroad (40), Canadian Pacific Railway (35), and Milwaukee Road (32).[2] Locomotives intended for use in Canada were built by General Motors Diesel, EMD's Canadian subsidiary. These included the Canadian Pacific's units,[3] and 22 for the Ontario Northland Railway.

Preserved examples

[edit]
Reading 902 at Steamtown National Historic Site
CP 4038 in Minnedosa, Manitoba

See also

[edit]

References

[edit]

Notes

[edit]
  1. ^ Foster, Gerald L. (1996). A field guide to trains of North America. Boston: Houghton Mifflin. p. 98. ISBN 0-395-70112-0.
  2. ^ Cook (2015a), p. 31.
  3. ^ Wilson (2017), p. 175.
  4. ^ "Home". Hub City Heritage Corporation Railway Museum.
  5. ^ "Collaboration Between Indiana Communities and Fort Wayne Railroad Saves Historic Artifacts". Fort Wayne Railroad Historical Society. Fort Wayne Railroad Historical Society. March 13, 2022. Archived from the original on March 15, 2022. Retrieved March 14, 2025.
  6. ^ "Beadle Park – Cresco, Iowa". Iowa Beautiful. Archived from the original on December 2, 2005.

Bibliography

[edit]
[edit]