MIT Nuclear Research Reactor
MITR-II | |
---|---|
Operating Institution | Massachusetts Institute of Technology |
Location | Cambridge, Massachusetts |
Coordinates | 42°21′37″N 71°05′47″W / 42.36028°N 71.09639°W |
Type | tank[1] |
Power | 6 MW[1][2] (thermal) |
Construction and Upkeep | |
Construction Cost | US$3 million |
Construction Began | 6 June 1956[1] |
First Criticality | 21 July 1958[1][3] |
Annual Upkeep Cost | US$2.5 million |
Staff | 36[1] |
Operators | 15[1] |
Refuel Frequency | 3-4 months |
Technical Specifications | |
Max Thermal Flux | 6.0×10 13 cm−2s−1[4] |
Max Fast Flux | 1.2×10 14 cm−2s−1[4] |
Fuel Type | plate type[4] (27 (Three dedicated to in-core experiments)[6]x) |
Cooling | light water[1] |
Neutron Moderator | light water[1] |
Neutron Reflector | |
Control Rods | |
Cladding Material | aluminum alloy[5] |
The MIT Nuclear Research Reactor (MITR) serves the research purposes of the Massachusetts Institute of Technology. It is a tank-type 6 megawatt reactor[2] that is moderated and cooled by light water and uses heavy water as a reflector. It is the second largest university-based research reactor in the U.S. (after the University of Missouri Research Reactor Center) and has been in operation since 1958.[7] It is the fourth-oldest operating reactor in the country.[1]
History
[edit]The first iteration of the reactor, MITR-I, operated from 1958 to 1974. The reactor was then upgraded to a new design, MITR-II, which offers a higher neutron flux.[8]: 46
There are plans to convert the reactor to use low-enriched uranium instead of high-enriched uranium to mitigate the proliferation risk; as of 2016, this conversion was planned for 2027.[9]
Technical specifications
[edit]The MITR-II design uses finned plate-type fuel arranged in a hexagonal pattern of rhomboid fuel assemblies.[5] Power is controlled by six manual boron-stainless steel blade-type control rods and one aluminum with cadmium control rod which can be placed on automatic control. Light water flows upwards through the core and a tank of heavy water surrounds the core. A wall of dense concrete that serves as shielding surrounds the tank of heavy water. The maximum coolant temperature is 50 °C (122 °F).[2] The light water and heavy water are cooled using forced circulation through heat exchangers to a secondary coolant system. The heat from the reactor is ultimately dissipated to the atmosphere via the secondary cooling system using two modular Tower Tech cooling towers – model TTXL-081950.[10]
The reactor uses highly enriched uranium 235 fuel, in the form of uranium-aluminum cermet with aluminum cladding.
Refueling takes place 3 to 4 times every year.[5] A single refueling involves rearranging the assemblies in the core or a combination of rearranging and replacement of old assemblies with new ones. This is more frequent than nuclear power plants and most research reactors. Power plants typically go 17 to 23 months between refueling outages, at which time they rearrange the entire core and replace 1⁄3 to 1⁄2 of the core. Many research reactors (particularly university reactors) go decades without refueling due to the high energy density of nuclear fuel and infrequent use at high power levels.
Uses
[edit]The MITR research program encompasses most aspects of neutron science and engineering including nuclear medicine. Some of these activities are:
- Neutron activation analysis for the identification of trace elements and isotope ratios in geological specimens
- Fission engineering
- Materials testing
- Training
- Neutron transmutation doping of silicon
- Nuclear medicine production from irradiated gold
- Arsenic dose measuring using a sample from hairs
- Experiments related to molten salt for use as reactor coolant
The MITR is one of only six facilities in the world that was engaged in patient trials for the use of boron neutron capture therapy (BNCT) to treat both brain tumors and skin cancer. The MITR fission converter beam is the first to be designed for BNCT. The facility no longer conducts BNCT trials.
The reactor has been criticized by Miles Pomper of the James Martin Center for Nonproliferation Studies for having insufficiently unique uses relative to the risk of using highly enriched uranium.[9]
Gallery
[edit]-
MITR, along with the Metropolitan Storage Warehouse, viewed from MIT Building 37.
-
Night time view from the same location. Fog produced by the cooling towers is brightly illuminated by floodlights.
-
Close up view of the reactor.
Further reading
[edit]- Perez, Pedro B.; Richards, Wade J. (22 February 2000). University Research Reactors: Contributing to the National Scientific and Engineering Infrastructure from 1953 to 2000 and Beyond (Report). National Organization of Test, Research and Training Reactors. Archived from the original on 1 July 2007. Retrieved 24 December 2021.
{{cite report}}
: Unknown parameter|agency=
ignored (help) - Riley, K.J.; Binns, P.J.; Harling, O.K. (18 March 2003). "Performance characteristics of the MIT fission converter based epithermal neutron beam". Physics in Medicine and Biology. 48 (7). Institute of Physics and Engineering in Medicine: 943–958. doi:10.1088/0031-9155/48/7/310. eISSN 1361-6560. ISSN 0031-9155. LCCN 58049741. OCLC 1762343. PMID 12701897. Wikidata Q34191347.
- MITR Staff (1 October 1970). Safety Analysis Report for the MIT Research Reactor (MITR-II), MITNE-15 (Report). Nuclear Engineering Department | Massachusetts Institute of Technology.
References
[edit]- ^ a b c d e f g h i j k l "IAEA Research Reactors Database (RRDB)". International Atomic Energy Agency. Archived from the original on 27 December 2021. Retrieved 27 December 2021.
- ^ a b c "Reactor | Reactor Systems | Cooling Systems". Nuclear Reactor Laboratory | Massachusetts Institute of Technology. n.d. Archived from the original on 24 December 2021. Retrieved 27 December 2021.
- ^ Taylor, Tracy (21 July 2021). "Today in NRL history - July 21st, 1958". Nuclear Reactor Laboratory | Massachusetts Institute of Technology. Archived from the original on 18 October 2021.
Today marks 63 years since the MITR-I first achieved criticality! The MITR-I was the first core configuration of the MIT Reactor (MITR) and was in operation from 1958 until 1973 (when the conversion to the MITR-II, the MITR's current core configuration, began).
- ^ a b c "Reactor | The Reactor at MIT". Nuclear Reactor Laboratory | Massachusetts Institute of Technology. n.d. Archived from the original on 24 December 2021. Retrieved 27 December 2021.
- ^ a b c d "Reactor | Core Description". Nuclear Reactor Laboratory | Massachusetts Institute of Technology. n.d. Archived from the original on 24 December 2021. Retrieved 27 December 2021.
- ^ "Reactor Experiments | Facilities". Nuclear Reactor Laboratory | Massachusetts Institute of Technology. n.d. Archived from the original on 24 December 2021. Retrieved 27 December 2021.
- ^ Yen, Earl C. (29 January 1986). "Cambridge evaluates MIT's nuclear reactor". The Tech. Vol. 105, no. 59. ISSN 0148-9607. OCLC 3406944. Archived from the original on 16 February 2021. Retrieved 24 December 2021.
- ^ National Academies of Sciences, Engineering, and Medicine (2016). Reducing the use of highly enriched uranium in civilian research reactors. National Academies Press. ISBN 978-0309379182.
{{cite book}}
: CS1 maint: multiple names: authors list (link) - ^ a b Adams, Dan (September 2, 2016). "Conversion of MIT reactor to safer fuel pushed to 2027". The Boston Globe. Archived from the original on September 23, 2021.
- ^ unit placard.