Jump to content

Triethylene glycol

From Wikipedia, the free encyclopedia

Triethylene glycol
Names
Preferred IUPAC name
2,2′-[Ethane-1,2-diylbis(oxy)]di(ethan-1-ol)
Other names
2-[2-(2-Hydroxyethoxy)ethoxy]ethanol
Triglycol
Identifiers
3D model (JSmol)
Abbreviations TEG
969357
ChEBI
ChEMBL
ChemSpider
ECHA InfoCard 100.003.594 Edit this at Wikidata
EC Number
  • 203-953-2
260942
RTECS number
  • YE4550000
UNII
  • InChI=1S/C6H14O4/c7-1-3-9-5-6-10-4-2-8/h7-8H,1-6H2 ☒N
    Key: ZIBGPFATKBEMQZ-UHFFFAOYSA-N ☒N
  • InChI=1/C6H14O4/c7-1-3-9-5-6-10-4-2-8/h7-8H,1-6H2
    Key: ZIBGPFATKBEMQZ-UHFFFAOYAS
  • OCCOCCOCCO
Properties
C6H14O4
Molar mass 150.174 g·mol−1
Appearance Colorless liquid
Density 1.1255 g/mL
Melting point −7 °C (19 °F; 266 K)
Boiling point 285 °C (545 °F; 558 K)
Hazards
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 1: Exposure would cause irritation but only minor residual injury. E.g. turpentineFlammability 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g. canola oilInstability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
1
1
0
Related compounds
Related diols
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

Triethylene glycol, TEG, or triglycol is a colorless odorless viscous liquid with molecular formula HOCH2CH2OCH2CH2OCH2CH2OH. It is used as a plasticizer for vinyl polymers. It is also used in air sanitizer products, such as "Oust"[1] or "Clean and Pure". When aerosolized it acts as a disinfectant. Glycols are also used as liquid desiccants for natural gas and in air conditioning systems. It is an additive for hydraulic fluids and brake fluids and is used as a base for "smoke machine" fluid in the entertainment industry.

Properties

[edit]

Triethylene glycol is a member of a homologous series of polyethylene glycols. It is a colorless, odorless and stable liquid with high viscosity and a high boiling point. Apart from its use as a raw material in the manufacture and synthesis of other products, TEG is known for its hygroscopic quality and its ability to dehumidify fluids. This liquid is miscible with water, and at standard atmospheric pressure (101.325 kPa) has a boiling point of 286.5 °C and a freezing point of −7 °C. It is also soluble in ethanol, acetone, acetic acid, glycerine, pyridine, aldehydes; slightly soluble in diethyl ether; and insoluble in oil, fat and most hydrocarbons.

Preparation

[edit]

TEG is prepared commercially as a co-product of the oxidation of ethylene at high temperature in the presence of silver oxide catalyst, followed by hydration of ethylene oxide to yield mono(one)-, di(two)-, tri(three)- and tetraethylene glycols.

Applications

[edit]

TEG is used by the oil and gas industry to "dehydrate" natural gas. It may also be used to dehydrate other gases, including CO2, H2S, and other oxygenated gases.[2] It is necessary to dry natural gas to a certain point, as humidity in natural gas can cause pipelines to freeze, and create other problems for end users of the natural gas. Triethylene glycol is placed into contact with natural gas, and strips the water out of the gas. Triethylene glycol is heated to a high temperature and put through a condensing system, which removes the water as waste and reclaims the TEG for continuous reuse within the system. The waste TEG produced by this process has been found to contain enough benzene to be classified as hazardous waste[3] (benzene concentration greater than 0.5 mg/L).

Triethylene glycol is well established as a relatively mild disinfectant toward a variety of bacteria, influenza A viruses and spores of Penicillium notatum fungi.[4] However, its exceptionally low toxicity, broad materials compatibility, and low odor combined with its antimicrobial properties indicates that it approaches the ideal for air disinfection purposes in occupied spaces.[4] Much of the scientific work with triethylene glycol was done in the 1940s and 1950s, however that work has ably demonstrated the antimicrobial activity against airborne, solution suspension, and surface bound microbes. The ability of triethylene glycol to inactivate Streptococcus pneumoniae (original citation: pneumococcus Type I), Streptococcus pyogenes (original citation: Beta hemolytic streptococcus group A) and Influenza A virus in the air was first reported in 1943.[5] Since the first report the following microorganisms have been reported in the literature to be inactivated in the air: Penicillium notatum spores,[6] Chlamydophila psittaci (original citation: meningopneumonitis virus strain Cal 10 and psittacosis virus strain 6BC),[7] Group C streptococcus,[8] type 1 pneumococcus,[8] Staphylococcus albus,[8] Escherichia coli,[9] and Serratia marcescens Bizio (ATCC 274).[10] Solutions of triethylene glycol are known to be antimicrobial toward suspensions of Penicillium notatum spores,[6] Streptococcus pyogenes (original citation: Beta hemolytic streptococcus Group A ),[11] Streptococcus pneumoniae (original citation: pneumococcus Type I),[11] Streptococcus viridans,[11] and Mycobacterium bovis (original citation: tubercle bacilli Ravenel bovine-type).[12] Further, the inactivation of H1N1 influenza A virus on surfaces has been demonstrated.[13] The latter investigation suggests that triethylene glycol may prove to be a potent weapon against future influenza epidemics and pandemics. However, at least some viruses, including Pseudomonas phage phi6 become more infectious when treated with triethylene glycol.[14]

Safety

[edit]

According to the European Chemicals Agency (ECHA), no hazards have been classified https://echa.europa.eu/es/substance-information/-/substanceinfo/100.003.594

References

[edit]
  1. ^ "OUST Aerosol - Clean Scent Ingredients". S. C. Johnson & Son. 2010. Retrieved 2014-02-24.
  2. ^ QB Johnson Manufacturing Archived 2012-05-13 at the Wayback Machine
  3. ^ 40 CFR 261.24; State of Michigan, Department of Environmental Quality, Waste and Hazardous Materials Division, Hazardous Waste File; Lee 8 Storage Facility, Olivet, MI; March 2009 Inspection and analytical results
  4. ^ a b Robertson OH (1949). "Disinfection of the air with triethylene glycol vapor". The American Journal of Medicine. 7 (3): 293–296. doi:10.1016/0002-9343(49)90429-5. PMID 18139414.
  5. ^ Robertson OH, Puck TT, Lemon HF, Clayton GL (1943). "The lethal effect of triethylene glycol vapor on air-borne bacteria and influenza virus". Science. 97 (2510): 142–144. doi:10.1126/science.97.2510.142. PMID 17788521. S2CID 26198638.
  6. ^ a b Mellody M, Bigg E (1946). "The fungicidal action of triethylene glycol". The Journal of Infectious Diseases. 79 (1): 45–46. doi:10.1093/infdis/79.1.45. JSTOR 30089292. PMID 20996927.
  7. ^ Rosebury T, Meiklejohn G, Kingsland LC, Boldt MH (1947). "Disinfection of Clouds of Meningopneumonitis and Psittacosis Viruses with Triethylene Glycol Vapor". Journal of Experimental Medicine. 85 (1): 65–76. doi:10.1084/jem.85.1.65. PMC 2135670. PMID 19871600.
  8. ^ a b c Lester W, Robertson OH, Puck TT, Wise H (1949). "The rate of bactericidal action of triethylene glycol vapor on microorganisms dispersed into the air in small droplets". American Journal of Epidemiology. 50 (2): 175–188. doi:10.1093/oxfordjournals.aje.a119352. PMID 18141117.
  9. ^ Lester W, Dunklin E, Robertson OH (1952). "Bactericidal effects of propylene and triethylene glycol vapors on airborne Escherichia coli". Science. 115 (2988): 37, 379–382. Bibcode:1952Sci...115..379L. doi:10.1126/Science.115.2988.379. PMID 17770126.
  10. ^ Kethley TW, Fincher EL, Cown WB (1956). "A System for the Evaluation of Aerial Disinfectants". Applied and Environmental Microbiology. 4 (5): 237–243. doi:10.1128/aem.4.5.237-243.1956. PMC 1057210. PMID 13363384.
  11. ^ a b c Robertson OH, Appel EM, Puck TT, Lemon HM, Ritter MH (September 1948). "A study of the bactericidal activity in vitro of certain glycols and closely related compounds". The Journal of Infectious Diseases. 83 (2): 124–137. doi:10.1093/infdis/83.2.124. PMID 18888328.
  12. ^ Potter TS (1944). "The possibility of prevention of tuberculosis by non-poisonous chemical air disinfection and by killed vaccines". Science. 99 (2577): 406–407. Bibcode:1944Sci....99..406S. doi:10.1126/science.99.2577.406. PMID 17772135.
  13. ^ Rudnick SN, McDevitt JJ, First MW, Spengler JD (2009). "Inactivating influenza viruses on surfaces using hydrogen peroxide or triethylene glycol at low vapor concentrations". American Journal of Infection Control. 37 (10): 813–819. CiteSeerX 10.1.1.148.5118. doi:10.1016/j.ajic.2009.06.007. PMC 7115294. PMID 19822378.
  14. ^ Turgeon N, Michel K, Ha TL, Robine E, Moineau S, Duchaine C (2016). "Resistance of Aerosolized Bacterial Viruses to Four Germicidal Products". PLOS ONE. 11 (12): e0168815. Bibcode:2016PLoSO..1168815T. doi:10.1371/journal.pone.0168815. PMC 5193356. PMID 28030577.